Install Docker Debian 10

  



Estimated reading time: 10 minutes

To get started with Docker Engine on Debian, make sure youmeet the prerequisites, theninstall Docker.

  • First, install community edition of Docker, as described in my Docker Media Server guide. Once that is done, install other pre-requisite packages using the following command. Sudo apt-get install bash jq curl avahi-daemon dbus software-properties-common apparmor-utils Once done, let's move on to installing HASS.io on Docker. Setup HASS.io on Docker.
  • Now that you have installed on your Debian 10, let’s go over the basic docker concepts and commands. Docker Images #. A Docker image is made up of a series of filesystem layers representing instructions in the image’s Dockerfile that make up an executable software application.

Method 1: Install Docker Using the Repository on Debian 10 The best option for most Debian 10 users will be to install Docker from its official repositories. To do so, follow the steps outlined below. Docker installed with the instructions from Step 1 and Step 2 of How To Install and Use Docker on Debian 10 Note: Even though the Prerequisites give instructions for installing Docker on Debian 10, the docker commands in this article should work on other operating systems as long as Docker is installed.

Prerequisites

OS requirements

To install Docker Engine, you need the 64-bit version of one of these Debian orRaspbian versions:

  • Debian Buster 10 (stable)
  • Debian Stretch 9 / Raspbian Stretch

Docker Engine is supported on x86_64 (or amd64), armhf, and arm64 architectures.

Uninstall old versions

Older versions of Docker were called docker, docker.io, or docker-engine.If these are installed, uninstall them:

It’s OK if apt-get reports that none of these packages are installed.

The contents of /var/lib/docker/, including images, containers, volumes, andnetworks, are preserved. The Docker Engine package is now called docker-ce.

Installation methods

You can install Docker Engine in different ways, depending on your needs:

  • Most usersset up Docker’s repositories and installfrom them, for ease of installation and upgrade tasks. This is therecommended approach, except for Raspbian.

  • Some users download the DEB package andinstall it manually and manageupgrades completely manually. This is useful in situations such as installingDocker on air-gapped systems with no access to the internet.

  • In testing and development environments, some users choose to use automatedconvenience scripts to install Docker.This is currently the only approach for Raspbian.

Install using the repository

Before you install Docker Engine for the first time on a new host machine, you needto set up the Docker repository. Afterward, you can install and update Dockerfrom the repository.

Raspbian users cannot use this method!

For Raspbian, installing using the repository is not yet supported. You mustinstead use the convenience script.

Set up the repository

  1. Update the apt package index and install packages to allow apt to use arepository over HTTPS:

  2. Add Docker’s official GPG key:

  3. Use the following command to set up the stable repository. To add thenightly or test repository, add the word nightly or test (or both)after the word stable in the commands below. Learn about nightly and test channels.

    Note: The lsb_release -cs sub-command below returns the name of yourDebian distribution, such as helium. Sometimes, in a distributionlike BunsenLabs Linux, you might need to change $(lsb_release -cs)to your parent Debian distribution. For example, if you are using BunsenLabs Linux Helium, you could use stretch. Docker does not offer any guarantees on untestedand unsupported Debian distributions.

Install Docker Engine

This procedure works for Debian on x86_64 / amd64, armhf, arm64, and Raspbian.

Debian

  1. Update the apt package index, and install the latest version of DockerEngine and containerd, or go to the next step to install a specific version:

    Got multiple Docker repositories?

    If you have multiple Docker repositories enabled, installingor updating without specifying a version in the apt-get install orapt-get update command always installs the highest possible version,which may not be appropriate for your stability needs.

  2. To install a specific version of Docker Engine, list the available versionsin the repo, then select and install:

    a. List the versions available in your repo:

    b. Install a specific version using the version string from the second column, for example, 5:18.09.1~3-0~debian-stretch .

  3. Verify that Docker Engine is installed correctly by running the hello-worldimage.

    This command downloads a test image and runs it in a container. When thecontainer runs, it prints an informational message and exits.

Docker Engine is installed and running. The docker group is created but no usersare added to it. You need to use sudo to run Docker commands.Continue to Linux postinstall to allow non-privilegedusers to run Docker commands and for other optional configuration steps.

Upgrade Docker Engine

To upgrade Docker Engine, first run sudo apt-get update, then follow theinstallation instructions, choosing the newversion you want to install.

Install from a package

If you cannot use Docker’s repository to install Docker Engine, you can download the.deb file for your release and install it manually. You need to downloada new file each time you want to upgrade Docker.

  1. Go to https://download.docker.com/linux/debian/dists/,choose your Debian version, then browse to pool/stable/, choose amd64,armhf, or arm64, and download the .deb file for the Docker Engineversion you want to install.

    Note: To install a nightly or test (pre-release) package,change the word stable in the above URL to nightly or test.Learn about nightly and test channels.

  2. Install Docker Engine, changing the path below to the path where you downloadedthe Docker package.

    The Docker daemon starts automatically.

  3. Verify that Docker Engine is installed correctly by running the hello-worldimage.

    This command downloads a test image and runs it in a container. When thecontainer runs, it prints an informational message and exits.

Docker Engine is installed and running. The docker group is created but no usersare added to it. You need to use sudo to run Docker commands.Continue to Post-installation steps for Linux to allownon-privileged users to run Docker commands and for other optional configurationsteps.

Upgrade Docker Engine

To upgrade Docker Engine, download the newer package file and repeat theinstallation procedure, pointing to the new file.

Install using the convenience script

Docker provides convenience scripts at get.docker.comand test.docker.com for installing edge andtesting versions of Docker Engine - Community into development environments quickly andnon-interactively. The source code for the scripts is in thedocker-install repository.Using these scripts is not recommended for productionenvironments, and you should understand the potential risks before you usethem:

  • The scripts require root or sudo privileges to run. Therefore,you should carefully examine and audit the scripts before running them.
  • The scripts attempt to detect your Linux distribution and version andconfigure your package management system for you. In addition, the scripts donot allow you to customize any installation parameters. This may lead to anunsupported configuration, either from Docker’s point of view or from your ownorganization’s guidelines and standards.
  • The scripts install all dependencies and recommendations of the packagemanager without asking for confirmation. This may install a large number ofpackages, depending on the current configuration of your host machine.
  • The script does not provide options to specify which version of Docker to install,and installs the latest version that is released in the “edge” channel.
  • Do not use the convenience script if Docker has already been installed on thehost machine using another mechanism.

This example uses the script at get.docker.com toinstall the latest release of Docker Engine - Community on Linux. To install the latesttesting version, use test.docker.com instead. Ineach of the commands below, replace each occurrence of get with test.

Warning:

Always examine scripts downloaded from the internet beforerunning them locally.

If you would like to use Docker as a non-root user, you should now consideradding your user to the “docker” group with something like:

Remember to log out and back in for this to take effect!

Warning:

Adding a user to the “docker” group grants them the ability to run containerswhich can be used to obtain root privileges on the Docker host. Refer toDocker Daemon Attack Surfacefor more information.

Docker Engine - Community is installed. It starts automatically on DEB-based distributions. OnRPM-based distributions, you need to start it manually using the appropriatesystemctl or service command. As the message indicates, non-root users can’trun Docker commands by default.

Note:

To install Docker without root privileges, seeRun the Docker daemon as a non-root user (Rootless mode).

Upgrade Docker after using the convenience script

If you installed Docker using the convenience script, you should upgrade Dockerusing your package manager directly. There is no advantage to re-running theconvenience script, and it can cause issues if it attempts to re-addrepositories which have already been added to the host machine.

Uninstall Docker Engine

Install Docker Debian 10

  1. Uninstall the Docker Engine, CLI, and Containerd packages:

  2. Images, containers, volumes, or customized configuration files on your hostare not automatically removed. To delete all images, containers, andvolumes:

You must delete any edited configuration files manually.

Install Docker On Debian 10 I386

Next steps

  • Continue to Post-installation steps for Linux.
  • Review the topics in Develop with Docker to learn how to build new applications using Docker.
requirements, apt, installation, debian, install, uninstall, upgrade, update

Estimated reading time: 7 minutes

You can run Compose on macOS, Windows, and 64-bit Linux.

Install Docker Debian 10 Digitalocean

Prerequisites

Docker Compose relies on Docker Engine for any meaningful work, so make sure youhave Docker Engine installed either locally or remote, depending on your setup.

  • On desktop systems like Docker Desktop for Mac and Windows, Docker Compose isincluded as part of those desktop installs.

  • On Linux systems, first install theDocker Enginefor your OS as described on the Get Docker page, then come back here forinstructions on installing Compose onLinux systems.

  • To run Compose as a non-root user, see Manage Docker as a non-root user.

Install Compose

Follow the instructions below to install Compose on Mac, Windows, Windows Server2016, or Linux systems, or find out about alternatives like using the pipPython package manager or installing Compose as a container.

Install a different version

The instructions below outline installation of the current stable release(v1.28.6) of Compose. To install a different version ofCompose, replace the given release number with the one that you want. Composereleases are also listed and available for direct download on theCompose repository release page on GitHub.To install a pre-release of Compose, refer to the install pre-release buildssection.

Install Compose on macOS

Docker Desktop for Mac includes Compose alongwith other Docker apps, so Mac users do not need to install Compose separately.For installation instructions, see Install Docker Desktop on Mac.

Install Compose on Windows desktop systems

Docker Desktop for Windows includes Composealong with other Docker apps, so most Windows users do not need toinstall Compose separately. For install instructions, see Install Docker Desktop on Windows.

If you are running the Docker daemon and client directly on MicrosoftWindows Server, follow the instructions in the Windows Server tab.

Install Compose on Windows Server

Follow these instructions if you are running the Docker daemon and client directlyon Microsoft Windows Server and want to install Docker Compose.

  1. Start an “elevated” PowerShell (run it as administrator).Search for PowerShell, right-click, and chooseRun as administrator. When asked if you want to allow this appto make changes to your device, click Yes.

  2. In PowerShell, since GitHub now requires TLS1.2, run the following:

    Then run the following command to download the current stable release ofCompose (v1.28.6):

Note: On Windows Server 2019, you can add the Compose executable to $Env:ProgramFilesDocker. Because this directory is registered in the system PATH, you can run the docker-compose --version command on the subsequent step with no additional configuration.

  1. Test the installation.

Install Compose on Linux systems

On Linux, you can download the Docker Compose binary from theCompose repository release page on GitHub.Follow the instructions from the link, which involve running the curl commandin your terminal to download the binaries. These step-by-step instructions arealso included below.

For alpine, the following dependency packages are needed:py-pip, python3-dev, libffi-dev, openssl-dev, gcc, libc-dev, rust, cargo and make.

  1. Run this command to download the current stable release of Docker Compose:

    To install a different version of Compose, substitute 1.28.6with the version of Compose you want to use.

    If you have problems installing with curl, seeAlternative Install Options tab above.

  2. Apply executable permissions to the binary:

Note: If the command docker-compose fails after installation, check your path.You can also create a symbolic link to /usr/bin or any other directory in your path.

For example:

  1. Optionally, install command completion for thebash and zsh shell.

  2. Test the installation.

Alternative install options

Install using pip

For alpine, the following dependency packages are needed:py-pip, python3-dev, libffi-dev, openssl-dev, gcc, libc-dev, rust, cargo, and make.

Compose can be installed frompypi using pip. If you installusing pip, we recommend that you use avirtualenv because many operatingsystems have python system packages that conflict with docker-composedependencies. See the virtualenvtutorial to getstarted.

If you are not using virtualenv,

pip version 6.0 or greater is required.

Install as a container

Compose can also be run inside a container, from a small bash script wrapper. Toinstall compose as a container run this command:

Install pre-release builds

If you’re interested in trying out a pre-release build, you can download releasecandidates from the Compose repository release page on GitHub.Follow the instructions from the link, which involves running the curl commandin your terminal to download the binaries.

Pre-releases built from the “master” branch are also available for download athttps://dl.bintray.com/docker-compose/master/.

Pre-release builds allow you to try out new features before they are released,but may be less stable.

Upgrading

If you’re upgrading from Compose 1.2 or earlier, remove ormigrate your existing containers after upgrading Compose. This is because, as ofversion 1.3, Compose uses Docker labels to keep track of containers, and yourcontainers need to be recreated to add the labels.

If Compose detects containers that were created without labels, it refusesto run, so that you don’t end up with two sets of them. If you want to keep usingyour existing containers (for example, because they have data volumes you wantto preserve), you can use Compose 1.5.x to migrate them with the followingcommand:

Alternatively, if you’re not worried about keeping them, you can remove them.Compose just creates new ones.

Uninstallation

To uninstall Docker Compose if you installed using curl:

To uninstall Docker Compose if you installed using pip:

Digitalocean Install Docker Debian 10

Got a “Permission denied” error?

Install Docker On Debian 10

If you get a “Permission denied” error using either of the abovemethods, you probably do not have the proper permissions to removedocker-compose. To force the removal, prepend sudo to either of the abovecommands and run again.

Where to go next

Install Docker Compose Debian 10

compose, orchestration, install, installation, docker, documentation